AIM Sports Sk/SKS Front Sight Adjustment Tool (Black, Small) &

This tool works perfectly! Makes adjusting the front sight post on an AK quick and easy. It's the right tool for the job!Not for use on frozen front sight posts, though. If your front sight post is locked up and won't rotate, you can avoid bending or breaking the ears of the tool by making a simple home-made "breaker" tool using this trick: Take a 1" long 5/16x18 bolt and a 5/16x18 brad hole t-nut (you can get these at your local hardware store for next to nothing), then cut a groove in the end of the bolt (I used an angle grinder) and drill a hole in the center of the bolt for the sight post (I used a 3/32 cobalt drill bit). Finally, attach the t-nut, flat end first, to create a reinforcing sleave/collar for the ears of your new breaker tool. After soaking the front sight for a while in penetrating oil, put the assembly over your sight and use a wrench to break it loose. It should fit perfectly if your sight post is relatively centered in the sight block and not all the way over to the left or right.

It’s the tool for the Ak sight and works

AKM RH-10 It worked great.

Zastava M85 compatibility: windage adjustments are fine, but it doesnt fit for vertical adjustments

I read all of the negative reviews about this tool breaking when trying to turn the front sight before buying the tool (all the different brands had the same bad reviews), but I decided to take the chance - for one reason: if *anything* on a firearm is so hard to manipulate then you need to stop and think about what you’re doing. I used this tool maybe 6 times and didn’t have any issues whatsoever! It’s obvious when you hold it in your hand that, no, it’s probably not going to stand up to any serious abuse… seriously it’s obvious. So, these reviewers that snapped the tool I to pieces probably didn’t know what they were doing at all and torqued the tool beyond it’s limits.

First, wanted to adjust the front sight pin down but opening in the key of the device to fit over the pin was WAY to small and I had to file it vigorously for 30 minutes to get it to finally at least open up enough to grab the pin to turn it. Then I wanted to adjust the sight pin left and right but the screw handle of the device and side hole did not align or fit over the side adjustment rod of the gun and so I was not able to do anything. Even just to try to adjust the sight, the device would cock over to the side at an angle and begin to slide off. My SKS is brand new out of some storage facility in Europe and is in pristine condition. It came with its own sight adjustment tool that worked great but I lost it. I will ask seller for replacement or refund. YIKES!!!

Works great!

I’ve used it on both my SKS and my AK. Very pleased with it. I’ve also used it to help others at the range.