Creality Official Upgrade Ender 3 V3 KE Hotend Kit with 2 Pack 0.4mm Nozzles, 300°C High Temperature Heating Block, 3D Printer Parts All Metal High Thermal Conductivity Extruder Hot End

Easy to install and replacement of the old nozzle. My old nozzle got so clogged up that I had to use a Dremel cutting wheel to remove it. This was any easy replacement as it included all the extra pieces like the heat sink that I had to cut through. If you need a replacement, I found this one to be more than suitable but wouldn't have replaced a working nozzle just because this is a new version.

Pretty good I like it but it's a pain In the butt with the disconnect and connections

Bought a new K1 a few weeks back and had a failed print that resulted in a blob of death on my stock hot end, after figuring out what needed to be replaced I ordered this item and the connector does not match the connector on my stock hot end, or the stock board in the hotend chassis. I have no idea what to buy now since these are listed as the official replacement and there is nothing on Creality's website

Quick and easy replacement, worked perfectly. Got the K1 Max running again.

Works great I still use it to this day

Well, doesn't fit the k1 SE I bought it for to replace a damaged hot end.Everything about it is compatible except for the thermocouple terminal. They used a different style that can't fit into the clip attachment female side on the SEs PCB.But not really the products fault. It's good quality, has all the tools needed and machined well. Very easy to install. If it actually fits.

I was having trouble with my extruder skipping and getting very poor print quality. I replaced the extruder stepper motor and extruder, thinking that was the problem since my printer showed that my hot end was getting up to temp. After nothing worked, I figured I would replace the hot end since it was the original hot end from when I bought the printer 2 years ago. WOW! What a difference this hit end has made. Now I get better prints then when my printer was new!. About the product. It is an upgrade hotend for the Ender 3 V3SE and KE. It uses the unicorn nozzles, so don't try using the sprite nozzles, they won't work. The new hotend was an easy installation by just removing the shroud and extruder, the removing the 4 screws holding the fan. The new hot end attaches perfectly to where the original hot end mounted. The electrical connections fit precisely as it was the original hotend. It took me about 10 minutes to take off and replace. I ran the leveling program and then did a level test print. The test came out almost perfect. I did raise the Z offset up by 1. This hotend upgrade is producing fantastic prints. This has solved my extruder skipping problem. Sometimes I just get to tunneled vision and didn't realize how much I had printed with the original hotend and they do wear out after awhile. I am very happy with this hotend upgrade and recommend it to those of you who own an Ender 3 V3 SE or KE.

Haven't used it yet, but appears to be legit, decent conversion to the unicorn nozzle for a se. Your not gonna get the higher temps from a se board, but I'm aware of that, and don't expect it, I just wanted the unicorn nozzle to prevent hot end clogs at the nozzle gap