(Pack of 40) Kesler 3 1/2 Inch Satin Nickel Door Hinges (5/8" Radius Corners)

These hinges came in a small tightly-packed box along with a plastic bag of screws. All of the hinges were in perfect condition; no marks, scratches or bends in the metal. They are standard thickness, as expected. The screws are the standard size screws for doors. Some other reviewers mention they wish the screws were longer; however, this size is the standard size screw and you should expect them to send the standard size; not longer than standard. If you are not comfortable with the standard screws, then get longer. But, you're using 3 screws per hinge-side. You shouldn't be hanging off your doors and 2 hinges with 3 screws per hinge-side should hold the weight of a hollow or solid core door without issues. But, if you want to hang off your doors or have kids that could potentially swing on them, then go for longer screws at your own cost.In my particular case, I did NOT remove or even attempt to remove the pin from the hinges. I didn't need to. I was replacing old doors in my house so used the existing slots of the old hinges on the door frames and measured them to match the new doors. Then I applied the new hinges to the frames and had my son hold the door up to the new slots I cut in the door and attached. So, no need to remove the hinges.I got the set of 18 and will buy this same brand if I need more in the future (regardless of count).On another note, I bought a door hinge jig that I used to cut out the slots for the hinges with my router and the hinges fit perfectly with the template-cut slots I made. So, I know they were machined properly. I highly recommend a jig for cutting hinge slots in doors if you own a router. Very big time saver and work super well with these hinges.

Outstanding quality and consistency. The stamped name adds a perceived brand quality and makes them less generic ;)Seriously zero issues. This manufacturer seems to have great standards and quality control. No scratches or blemishes. Nice finish and all fit and operate perfectly.Hinge pins remove easily for adding doorstops. Screws match nicely and are of equally high quality.As some other reviewers mentioned good to grab a few inch long stainless #8 or #10 screws for the inevitably handful of prior door or jamb holes that may be stripped out.I used a drill to remove and install 84 of these as replacements for dated and tired shiny brass. Replaced all one at a time without removing the doors and worked out great.Hinges are sturdy and a great value for the money for interior hollow core doors.

I can't believe some reviewers complain about this hing. It's a heavy duty, quality hinge. Some say it sticks or makes a sound when operating. It's a standard pin hing, not a ball bearing! A drop of oil and it's good for many years of silent, smooth service. So much nicer than the old paint covered brass builder grade hinges that were installed in our "custom" home. Bought 70 or them and not a single problem. The screws are exactly the size that the builder hinges use. #8 3/4" screws. After years of service and drying of the wood some of the screws will strip when you reinstall. Just drop by your local big box store and buy some stainless #10 1" screws to replace the ones that strip and you are good to go. Will recommend and will buy again if needed!

Project: Replace all the polished brass dooknobs in my home with satin nickelActual: Failed to realize how MUCH polished brass hardware is in my home beyond doorknobs,Result: Absolutely pleased! These hinges are PERFECT. I have 34 doors to replace hardware on. I started with a project three-pack of hinges from the local big box store to see if they fit. At $8/three hinges I was mortified at what would be the cost -- until I found these. Two packs of 50 hinges later, I now have beautiful, clean, shiny satin nickel hinges everywhere there once was ugly, tarnished, sloppily painted brass hinges.THESE HINGES ARE AWESOME! Well packaged, solid, and easy to install. An absolute must if you have lots of hinges to replace.

Packaged well, screws supplied. Of the 50 in the package, all were smooth movers except for two. Probably not noticeable one mounted, but definitely missed the quality of the other 48.If you are using these to replace hinges already installed, you should expect that for some holes the screws provided may not tighten because the holes are already dethreaded from the original installation. It was sure handy to have a bag of 1" hinge screws on hand so that, in those cases, I could finish installing that hinge and not have to come back to it later.

I bought these hinges to swap with the old brass hardware from twenty years ago. They fit perfectly, look great and price was cheaper than the local home improvement store.Hinges look to be heavy duty. Pins are fairly easy to remove by tapping them out with small punch and hammer.. The screws are just slightly shorter than the original, but they still fit snug and securely held doors in place as good as the original.

I have 23 doors I needed to replace the hinges since the builder installed cheap ones and painted them. This large pack was a way better price than the local home stores had. Additionally, these Kesler hinges are better quality too. They feel nice and solid and have a glossy finish that matches the door knobs I picked out for my project. Completely happy with this purchase.

I bought these to replace brass hinges since the door knobs in the house are satin nickel and I wanted the hinges to match. No issues swapping out the hinges, just tedious. Warning - be sure to install with the hinge pin on top. After a few hinges I realized I hasn't paid attention and had installed several with the hinge pin facing down. Easy enough to remove the hinge pin and install correctly.

Exactly the size it was to be perfect fit metal thickness right on ,sturdy product