FaithfullCable Access Rod & Accessories Kit - 15 Pieces Including 10 x 330mm Rods – Total Length 3.3 Metre

What a wonderful little push rod set! Did the job perfectly and at such an amazing price, I can't understand how any of the other reviewers think that this is not good value for money!I needed to get a coax cable under about 2.5m of floor through a very tricky and tight route with multiple blockages. Took me several hours to do, but it certainly would not have been possible without these rods, my inexpensive endoscope https://www.amazon.co.uk/dp/B08CZDYZV8?psc=1&ref=ppx_yo2ov_dt_b_product_details and some strong insulation tape!The rods are brilliant. Brass joints fit together easily and strongly, and there are a range of useful accessories (although none as useful as good old insulation tape!). They are strong yet flexible and took a good amount of tension and compression throughout the job. The brass connectors do protrude from the rods which caused them to get stuck in the tightest of spaces, but I can't see how they could be constructed differently.The short section length was really helpful, allowing me to add to the rod in a very tight space as I pushed it through the gap. This also meant that on many occasions I could construct two rods: one to do the job, and the other to carry my endoscope so that I could see what has happening.I did a lot of research into different rod solutions, many costing over £100. This little kit really performed for the job that I needed doing and cost £11!!! Amazing. I'm tempted to buy one or two more in case I have any larger scale jobs in the future as they will easily join together.I can't speak for the long-term durability of the product as I have used it for one job, but it was my saviour on that job, and for £11 worth it for that single use.

I bought it to run a light switch cable from the ceiling through a stud wall, which wasn't easy due to a noggin in the way. Luckily noggin had a hole cut through so using this set of rods it was really easy to passt the cable through.The rod is thin but stable. I'm happy with the quality.

As a professional Dashcam fitter I use this product daily! It is good value for money and can fit through very tight gaps, perfect for straight lines, there is a small amount of flexibility but will struggle to go round corners. The brass connectors can break if you out too much force on them but over the last year I have broken less than 5. Would recommend to someone who works with cables especially in tight spaces.

Handy little set to keep in tool box, got me out of an awkward situation on more than one occasion.

I can't complain to much as this kit did the job and has a good selection of ends. However mid pull the threads on one rod simply snapped off, definitely not what you need, fortunately I could still retrieve the rest of the rod. I think likely dodgy single rod as the others held out just fine.

Awesome, exactly what I needed to get cables into the loft for wiring a security camera as well as chasing cable through walls for new light switch. Good quality and had no issues, strong enough to push through paramount board too.

Looks a decent tool with stiff fibreglass and brass looking threaded joints but on first use (literally) a brass threaded joint came off and I lost a rod. The hook piece is also very large and would require a hole much larger than the rods. The rods are fairly stiff and individually not very flexible but I think that might be a good thing.

I had to pull some cables behind some insulation and this kit was a lightsaver. It made the job so easy. I especially love the piece that loops around the end of the cable and is secured by just friction. You can pull it as hard as you want and it won't let go of the cable. Made it very easy to pull the cable behind the dry wall.Takes a while to figure out if you have no experience, but the kit seems to include everything you might need. Only hard bit was if you needed to bend the poles 90 degrees, they could only bend about 10-15 degrees. In a straight line they were absolutely excellent - so you just need to adjust your project so that most of the force is in a straight direction. Makes you think a bit more, but in the end, I wired up the room perfectly.